10 Tips To Make A 50Cc 2 Stroke Faster

Looking to squeeze more power out of your 50cc 2-stroke engine? You’ve come to the right place! In this article, we’ll show you how to make a 50cc 2-stroke faster without breaking the bank or diving into complex modifications. So, if you’re eager to boost your bike’s performance and leave your friends in the dust, keep on reading! With a few simple tweaks and adjustments, you’ll be zipping down the road with a faster and more exhilarating ride in no time. Let’s dive right in and explore how to make a 50cc 2-stroke faster!

10 Tips to Make a 50cc 2 Stroke Faster: Boost Performance Effectively

How to Make a 50cc 2 Stroke Faster

Your 50cc 2-stroke engine may already provide an exhilarating ride, but you may be looking for ways to squeeze even more performance out of it. Fortunately, there are several modifications and tweaks you can make to boost the speed and overall performance of your 50cc 2-stroke engine. This article will guide you through the steps, providing detailed information on each method.

1. Upgrade the Exhaust System

The exhaust system plays a crucial role in maximizing the performance of your 50cc 2-stroke engine. By replacing the stock exhaust system with an upgraded performance exhaust, you can significantly enhance the engine’s power output. Here are a few options to consider:

  • Expansion Chamber: Installing an expansion chamber exhaust system can improve low-end torque and mid-range power, resulting in faster acceleration.
  • Performance Muffler: Upgrading to a performance muffler can enhance exhaust flow, reducing backpressure and increasing overall engine efficiency.
  • Aftermarket Silencer: Replacing the stock silencer with an aftermarket one can reduce weight while providing improved exhaust flow.

2. Replace the Carburetor

The carburetor plays a critical role in fuel delivery and air-to-fuel ratio. By upgrading to a larger and more efficient carburetor, you can optimize the engine’s performance. Look for a carburetor that is specifically designed for your 50cc 2-stroke engine and consider the following factors:

  • Venturi Size: Opt for a venturi size that matches your engine’s requirements. A larger venturi allows more air and fuel to enter the engine, increasing power.
  • Jetting: Fine-tune the air-to-fuel mixture by adjusting the jetting. This ensures optimal performance at different throttle positions.
  • Idle Speed Screw: Adjusting the idle speed screw can optimize the engine’s idle RPM, improving overall performance.

3. Upgrade the Air Filter

An aftermarket air filter can improve airflow and filtration, contributing to better engine performance. Choose a high-quality air filter designed for your 50cc 2-stroke engine to maximize air intake while protecting the engine from contaminants. Some popular options include:

  • High-Flow Foam Filters: These filters provide excellent filtration and increased airflow, ensuring a clean and consistent air supply to the engine.
  • Performance Pod Filters: Pod filters offer a high surface area for improved filtration and increased air intake.

4. Increase Compression Ratio

By increasing the engine’s compression ratio, you can extract more power from your 50cc 2-stroke engine. However, this modification requires mechanical expertise and may involve engine disassembly. Consider the following methods:

  • Head Milling: Removing material from the cylinder head increases the compression ratio. Consult with an expert to ensure proper milling depth.
  • Thin Base Gasket: Replacing the stock base gasket with a thinner one reduces the volume in the combustion chamber, effectively raising the compression ratio.
  • Porting and Polishing: Professional porting and polishing of the cylinder and intake/exhaust ports can optimize airflow and increase performance.

5. Upgrade the Ignition System

Installing a high-performance ignition system can improve the engine’s combustion efficiency and overall power output. Consider these upgrades:

  • CDI (Capacitor Discharge Ignition) Unit: Upgrading to a programmable CDI can provide precise ignition timing control for optimal performance at different RPMs.
  • High-Output Coil: Replacing the stock coil with a high-output coil can generate a stronger spark, promoting better combustion.
  • Iridium Spark Plug: Swapping the stock spark plug with an iridium spark plug improves ignition efficiency.

6. Optimize the Transmission

Modifying the transmission settings can enhance acceleration and top speed. Consider the following adjustments:

  • Gearing: Changing the front or rear sprocket size can alter the gear ratio, optimizing performance for acceleration or top speed.
  • Clutch Springs: Upgrading to stiffer clutch springs can improve engagement and prevent power loss during acceleration.

7. Use High-Performance Fuel and Oil

Using high-quality fuel and oil is essential for optimal engine performance and longevity. Choose a fuel with a higher octane rating to prevent detonation and use a high-quality synthetic 2-stroke oil for proper lubrication.

8. Fine-Tune with a Dyno

A dynamometer, or dyno, can provide accurate measurements of your engine’s performance, helping you fine-tune the modifications and adjustments made. Consult a professional tuner with experience in 50cc 2-stroke engines to achieve the best results.

Hey there! Some links on this page are affiliate links which means that, if you choose to make a purchase, I may earn a small commission at no extra cost to you. I greatly appreciate your support!

9. Regular Maintenance

Finally, don’t forget the importance of regular maintenance to keep your 50cc 2-stroke engine running smoothly. Inspect and clean the air filter regularly, change the spark plug at appropriate intervals, and ensure the carburetor is clean and properly adjusted.

10. Safety Considerations

While modifying your 50cc 2-stroke engine can be exciting, it’s crucial to prioritize safety. Always wear appropriate safety gear and follow local traffic laws when riding your enhanced machine. Remember, increased speed requires enhanced control and awareness.

By following these tips and making the necessary modifications, you can unlock the full potential of your 50cc 2-stroke engine and enjoy a faster and more exhilarating ride. Keep in mind that some modifications may void warranties or be subject to local regulations, so it’s important to check with local authorities and consult experts when necessary. Stay safe and enjoy the ride!

How to make your 50cc moped WAY FASTER for cheap! (highly recommend)

Frequently Asked Questions

How can I make my 50cc 2-stroke engine faster?

There are several modifications you can make to improve the speed and performance of your 50cc 2-stroke engine:

What role does the exhaust system play in increasing the speed?

The exhaust system plays a crucial role in improving engine performance. Upgrading to a high-performance exhaust system can increase the flow of exhaust gases, allowing the engine to breathe more efficiently and generate more power.

What are the benefits of using a high-performance air filter?

Using a high-performance air filter can increase airflow to the engine, resulting in improved combustion and more power. It prevents dirt and debris from entering the engine, prolonging its life and maintaining optimal performance.

Is it possible to upgrade the carburetor for better performance?

Yes, upgrading the carburetor can significantly enhance the engine’s performance. A larger carburetor with adjustable jets allows for better fuel and air mixture control, resulting in improved acceleration and top speed.

Can changing the gear ratio improve speed?

Yes, altering the gear ratio can improve acceleration and top speed. Changing to a taller gear ratio (larger rear sprocket or smaller front sprocket) allows the engine to reach higher RPMs, translating to increased speed.

What about using performance spark plugs?

Performance spark plugs can provide a stronger and more efficient spark, leading to more complete combustion and increased power. They can improve throttle response and overall engine performance, especially when combined with other modifications.

Is it necessary to rejet the carburetor after modifications?

When making significant modifications like upgrading the exhaust system or air filter, rejetting the carburetor is often necessary. This ensures the proper air-fuel mixture, maximizing performance and preventing engine damage.

Final Thoughts

In conclusion, implementing these modifications and maintenance practices can significantly enhance the performance of a 50cc 2-stroke engine. By optimizing the air and fuel mixture, upgrading the exhaust system, and increasing engine airflow, riders can experience greater speed and power. Additionally, regular maintenance, such as cleaning the carburetor, adjusting the clutch, and replacing worn-out parts, ensures optimal functioning of the engine. By following these steps, enthusiasts can make their 50cc 2-stroke engines faster and experience an exhilarating ride.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *