How to Hang Electric Scooter On Wall- 2 Easy Way!
Today we discuss How to Hang Electric Scooter On Wall. Do you have an old electric scooter lying around somewhere? Why not use it to hang a new and improved way to commute? The electric scooter can be used as a makeshift wall. just connect the two lead wires together and plug them into an electric outlet.
How to Hang an Electric Scooter on the Wall
1. Find the hole in the wall where you want to hang your electric scooter
2. Thread a cable tie through the hole
3. Thread one of the lead wires from the electric scooter into each end of the cable tie
4. Secure one end of the lead wire to an electrical outlet
5. Run the other lead wire up and around your electric scooter until it is tight against itself
6. Tighten both ends of the lead wire with your fingers or with pliers
The Electric Scooter has Wall Mount
You can use the electric scooter as a makeshift wall mount for your electric scooter. All you need to do is connect the two lead wires together and plug them into an electric outlet. With this simple installation, you’ll have a sturdy and stylish way to hang your scooter on the wall.
One of the best features of this system is that it’s easy to install and remove when needed. When not in use, you can simply undo the loose screws at the bottom so that it hangs off of the wall. The overhead lights will also provide lighting on your bike while hanging on the wall, giving it a unique look as well.
advantages of Hanging Electric Scooter On the Wall:
Hanging a scooter on the wall is not only convenient, but it also saves space and enables you to have a variety of hangouts.
Electric scooters are the new craze in town. If you don’t have the space for parking your electric scooter, this is a fantastic idea! The best part about using an electric scooter is that it can be hung on walls for easy and convenient storage.
How to Connect the wires.
First, find the two wires attached to your electric scooter. They will be connected through a small connector that looks like this:
Now you need to find an outlet. It’s easiest to use an extension cord because it can reach more outlets than a regular cord can.
Once you find the proper outlet, connect the two lead wires together and plug them into the outlet. The wire ends should look like this:
Next, screw a light bulb into the socket on top of your electric scooter wall mount. Now that the light is installed, attach one of your electric scooter’s metal arms to the metal bracket on top of your light fixture.
The metal arm should have a notch that fits onto one of the screws at the top of your light fixture. Make sure that it lines up with both screws before securing it in place with a screwdriver or another tool:
The electric scooter should now hang from its metal arm and act as extra support for your light fixture.
How to Hang Electric Scooter On Wall (other option):
Before you start hanging your scooter on the wall, you should first clean the wall with a damp cloth to make sure there is no dust on it. Then, You may use a stud finder to make sure you find the studs on the wall where you want to hang the scooter.
Then, you’ll need to find a picture hook that is long enough to fit the scooter’s rear wheel axle. It is recommended that you use at least a three-inch hook. Never hang the scooter by the seat, handlebars, or wires as these parts can easily break. Finally, hang your scooter by lining up the hook with the axle and hanging it.
Conclusion
After reading this article, you know how to hang an electric scooter on the wall. This article will help you get started with solving your problem.
